Enter your email address in the field below and click submit

Home  >>  News  >>  How to Clean Audio Connectors
  • 31/08/2015
    How to Clean Audio Connectors

    Enjoying pristine audiophile-level sound requires basic maintenance and cleaning procedures. By checking your audio connections on the regular basis for signs of dust and debris, it's possible to avoid corrosion, decrease electrical interference and stay away from poor connections caused by contaminants. Proper maintenance -- no matter whether with alcohol or with an audio-industry deoxidizer -- adds years to the existence of the audio procedure and provides you with an unfettered and distortion-free musical experience.


    Use cleaning solutions that won't corrode or degrade the performance of your audio connectors. Water-based cleaners or impure solutions of alcohol can impede connections and end result in damage for your audio strategy, as can leaving your program in an location prone to high levels of moisture and humidity. Making use of an abrasive cleaner on gold-plated and copper connectors can erode the metal in excess of time. Gold-plated connections require special care, merely because abrasions towards the gold plating can expose the underlying metal and increase the potential for tarnish and corrosion. For gold-plated connectors, use a product specifically made for cleaning gold connectors and apply the product with as little friction as possible.


    Affordable alcohol works well as an audio connector cleaner. Choose a 90-percent or larger solution of high-purity octyl alcohol, which does not leave a residue. Do not use rubbing alcohol; it leaves residue behind when it evaporates. Apply the solution by using a nonabrasive cloth and gently polish the connector. When employing alcohol-based cleaners, keep the solution away from heat and sparks and clean the connectors in a well-ventilated place. After cleaning, leave the connectors unplugged and your method powered off for several hours until the alcohol completely evaporates.


    Deoxidizers formulated specifically for audio connectors eliminate oxidation, corrosion and tarnish with no affecting other components. Apply a deoxidizer such as Kontak or DeoxIT on the connectors and wait for ten to 15 minutes. Lightly polish the connectors that has a lint-free cloth that is certainly free of contaminants to clean the audio connectors. Deoxidizers eliminate corrosion, dirt and impurities that would otherwise degrade the audio high quality of the strategy.

    Preventing Corrosion

    After you clean the connectors, apply protective caps on the connections which you don't use regularly to reduce contamination. Protective caps retain out dust and moisture having a near airtight seal on the connectors. Caps reduce electromagnetic and radio frequency interference, resulting in considerably better high-quality sound. For active connections, replace outdated connectors with airtight gas-sealed connectors to reduce the accumulation of dirt, debris and corrosion. Placing your audio program within a protective cabinet can also reduce contamination on the connectors.